Cosber Industrial | KCH Series Vehicle Sideslip Tester

Single Pad Side Slip Tester

KCH Vehicle Sideslip Tester inspects the matching between wheel camber and wheel Toe-In and Toe-Out while the vehicle is driving straightaway. When the vehicle is passing over the Sideslip Plate, the plate is pushed to the left or the right depending on the wheel tracking.

Any deviation will be sent to computer by the displacement sensor and appeared in sideslip volume and sideslip direction

This Sideslip tester is 4 plates structure (2 plates are releases use) with synchronous mode in order to inspect both wheels’ sideslip value of a vehicle. The inspection result is displayed by a digital board. It is control by Integrated Circuit (IC) board inserted in the display unit.

The control display unit has power unit, amplifier, A/D converser, Control circuit card and LED display board. The tester uses Integrated Circuit card to collect the real time data, and then process and display the volume figure. As soon as a real time bigger value is collected, this bigger figure will be displayed. If the next figure is smaller than its precedent won’t be display.

Features:

Double Pad Side Slip Tester
  • Side Slip plate & Protection frame integrative structure
  • Side Slip plate locker with inner key
  • Side Slip single plate or double plate
  • No maintenance body design
  • Galvanized plate surface for extra long service life
  • High precision sensor to ensure the exactitude of result
  • Upper and lower dual bearing system makes smooth movement
  • Selection of synchronic or independent motion type for different regulation requirement
  • Over-load & over-value alarm function
  • Can be integreated with 2 more equipment by VIS Control System
  • Standard RS-232 connection port
  • Mini printer (built-in)
Specification:
Model KCH-10 PN:5104004 KCH-15 PN:5105002 KCH-18 PN:5106003
Max. Axle Load (kg) 10000 15000 20000
Measuring ranges (m/km) ±15.0 ±15.0 ±15.0
Sideslip Board Dimensions (mm) 1100 x 1000 1100 x 1000 1000 x 800
Release Board Dimensions (mm) 1100 x 300 1100 x 300 800 x 315
Structure Form Double plates with release board Double plates with release board Single Testing Plate with Single Releasing Plate
Power Supply AC 220V, 50Hz,ground AC 220V, 50Hz,ground AC 220V, 50Hz,ground